Product Description
RFID Wiegand Output Card Reader For Access Control Systems
Standalone Access Controller is specially designed for the control of the entrances of buildings,residential districts , factories . It support four ways to open doors:Proximity card , password ,proximity card plus password ,force password with alarm signal output Emid or Mifare Card . It will provide users with a simple , direct and secure access control system solutions .
Specifications :
| Dimension | 125*86*22mm |
| Materials | plastic housing |
| Voltage | DC 9-15V |
| Frequency | 125k±5KHz / 13.56MHZ±15KHz / 2.4G |
| Reponse time | <100ms |
| Support card | ID/IC/RFID |
| Operating distance | ID>10cm ; IC>3cm |
| Transmission distance | >80-100M |
| Equipment Protection | The power reverse protection |
| Voltage protection | MAX : ±15V |
| WorkingTemp | -0℃ ~ 60℃ |
| Storage Temp | -20 ~ 80% |
| Protection grade | IP65,Anti water,Anti dust |
| Weight: | 0.5kg |
| Standard Packing: | 30pc |
| Cartons size: | 54L * 20W * 30.5H (cm |
Description :
1 . IP65 and plastic material access control
2 . Anti-vanda , waterproof & back-lit metal key buttons, slim , elegant and rugged design ,
3 . Lock control delay , unlock duration, alarm delay;
4 . Third part electric lock , alarm, door sensor , exit button and doorbell for access control interface .
5 . Support wiegand input and output , can work with reader or work with control board as a reader
6 . Simple programming , Easy Operation
7 . Can setting cards via management card or on keypad
8 . Data is protected even after power failure
9 . With back highlight
10 . Work with magnetic lock , electric lock , exit button , door sensor , bell , alarm , slave reader
